HydroElite VIDI
The top model from Hydroware
HydroElite VIDI, which is the top model from Hydroware, is an integrated drive and control system for hydraulic elevators. It is equipped with Hydroware’s unique valve system which makes it possible for the elevator to go with direct to floor travel, completely without creeping. The valve also does not need to bypass the oil at full speed upwards. HydroElite VIDI is equipped with an efficient air-cooled IE2 motor and frequency control. The rated speed is gradually reduced when the load exceeds 25 percent of the rated load, which greatly reduces the power requirement.
Benefits with HydroElite VIDI
Significantly reduced power demand and low energy consumption
HydroElite VIDI is equipped with a current-limiting drive and an air-cooled IE2 motor. Thanks to accepting that the speed is regulated down slightly from a load of 25%, you can reduce the power requirement up to 70%. According to VDI4707, only 20% of all trips are with more than 25% load. The air-cooled motor and the unique valve’s properties also reduce energy consumption by up to 70% compared to other conventional systems.
Quick installation
HydroElite VIDI is pre-assembled and function tested in our factory, which shortens the installation time. Commissioning is easily done with the help of a learning journey for the hydraulics and one for the floor plan setting. No manual adjustments are required and the valve accuracy increases for each trip.
Increased capacity and comfort
Direct approach to the floor and the fact that no bypass of the oil is needed gives shorter travel time and increased travel capacity. In addition, the reaction time from a command to start is very short due to the fact that the entire system is perfectly tuned, which also helps to increase the elevator’s capacity and comfort.
No overheated oil
Thanks to the valve’s unique properties, more trips can be made without the oil getting too hot. The air-cooled motor helps keep the oil cool. With a HydroElite VIDI, you normally do not have to worry about overheated oil and there is normally no need for an energy-intensive oil cooler.
Safer with one supplier
The fact that the drive and control system come from the same supplier provides increased security and easier handling in terms of support, service and guarantees throughout the lifespan of the elevator.
Document
Here is more information about our products and services.
Technical overview of HydroElite VIDI
Unique Technology
- EN81-20 / 50 certified: common type certificate for A3 / UCM
- Frequency control
- Air-cooled IE2 motor
- Unique servo valve
- Direct approach to floor
- No by-pass of the oil at full speed upwards
- Self-learning completely without manual settings
- Precise floor adjustment through a self-adjusting positioning system
Energy and capacity
- Up to 70% energy savings
- 10-50% shorter travel time by eliminating creeping and oil bypass
- 50-70% reduced power consumption
- Faster start and temperature and load independence
- Higher traffic capacity without the need for oil cooling
Open and modular
- Flexible and modular to suit all types of installations
- Direct control, pickup, down or full collective and selectors for several elevators in groups.
- Built-in diagnostic system for efficient maintenance and easy troubleshooting
- Remote fault reporting and service diagnostics – option
Different models of HydroElite drive and control systems
HydroElite is available in the VENI, VIDI, MINI and MRL versions.
HydroElite VENI
Low energy consumption
HydroElite VENI takes full advantage of the unique valve.
The system provides an energy consumption that is up to 50% lower than traditional electronic valves.
HydroElite VIDI
Low power output
Significantly reduced power demand and low energy consumption.
HydroElite VIDI is equipped with a current-limiting drive and an air-cooled IE2 motor.
HydroElite MINI
For small spaces
HydroElite MINI is used where there is not enough space.
Good when there is too little space on the way to or inside the machine room, to be able to use a normal tank size.
HydroElite MRL
Machine roomless
HydroElite MRL is the machine roomless alternative that is increasingly in demand.
Due to several different aspects, it is better to place control and drive systems outside the shaft.
Hydraulic cylinder
Cylinders for hydraulic elevator
Hydraulic cylinder from COAM.
We supply all parts for elevator installations including hydraulic cylinders. We work with COAM as a supplier.
Other elevator components
Everything from one supplier
One Stop Shop.
One Stop Shop for all the parts needed for an elevator installation. For you, only contact with one supplier is needed.